Most big-city folks do not ever have to wonder, "What is a septic tank Install?" That's one of the privileges of living in a heavily populated area. The local municipality, generally the city, has its own wastewater treatment facility, and all the homes and businesses are hooked up to it. When you flush, take a shower, or do a load of laundry, all the water that is used gushes through the pipes in the building, out through a main line, through the city sewer system, and to the wastewater treatment plant. However, laying the lines into neighborhoods is very expensive and some areas, even in large cities, still don't have access to the municipal wastewater treatment plant.
What is a septic tank pumping? In short, it's one part of an on-site wastewater treatment facility, used in homes and businesses that don't have municipal sewer access or that have not yet hooked up to it.
What is a Septic Tank: The Basics of Operation
When a home or business doesn't have sewer access, the main line from the building connects to a septic tank, or a storage tank for wastewater. It's outside the building and is commonly buried underground, so it's quite often undetectable, even if you're looking for it. The reservoir takes care of the first stage of cleaning the wastewater, so it can return to the environment risk-free and won't present a health risk to people and animals in the area. When the wastewater enters the reservoir, it divides into three layers; scum (buoyant materials that float), sludge (dense materials that sink), and effluent (liquid/ water). In the reservoir, natural bacteria goes to work devouring the solids, so as much as 50% of the sludge can be converted into liquid or gas. As the effluent levels build up, the liquid is allowed to pass through to a second compartment of the reservoir or it may move onto a discharge area. The remaining sludge and scum build up, and have to be pumped out every so often. Most homes need pumping every 3-5 years, but others could require pumping annually, to make sure the system continues to function in top form.
How the System Works Together
When the effluent departs the reservoir, it's still not clean, but it is free of most particles. The soil generally has bacteria and will finish cleaning up the effluent, but the effluent must be released smoothly, so the soil can absorb it sufficiently and the bacteria can function. The part of the system that discharges the effluent is often referred to as an absorption area, leach field, or drainfield. Leach fields transmit the effluent through a series of underground pipes that are perforated, letting it to progressively seep into the soil.
If you have or need a septic system, "What is a septic tank?" is going to be the first of many questions you'll have. Our partner technicians are friendly and educated, and can answer all your questions, as well as install, pump, inspect, and maintain your system. Call us at (404)998-8812 today. http://atlantaseptictankpros.com
If you're wondering, "How does a septic tank work?" you're not alone. This is one of the most frequently asked questions and the answer is fairly straightforward: science. In a traditional system, Mother Nature does most of the work, herself, though the design of a system can help encourage the process as well. How Does a Septic Systems Install Work: Understanding the System The reservoir is only one part of the system, though most of the work is done there. All the wastewater from a building joins up in a centralized line that exits to the tank. This includes water from the sinks, toilets, showers, washing machine, dishwasher, and anything else you may have that drains. The reservoir's job is to provide an initial clarification stage for the wastewater. When it's clear enough, it gets discharged into a leach field or drainfield, where the bacteria in the soil finishes cleaning it. How a Septic Tank Pumping Works: Understanding the Reservoir Most modern reservoirs have two compartments, but some of the older ones have a single space. They're usually made of cement, fiberglass, steel, and plastic. When the wastewater goes in from the main line through an "inlet," it connects with a "baffle" which stimulates it to separate into three layers. Dense materials, such as waste, sink to the bottom. This layer is referred to as "sludge." Buoyant materials, like toilet paper and oil, float to the top and form a layer of "scum." The water in the middle is called "effluent." It's frequently clear of particles, and it either moves into the second chamber for further clarification or it leaves the reservoir through a sifted "outlet" and goes to the leach field. How Do Septic Repair Work: Understanding the Leach Field The effluent needs to be discharged somewhere and there are numerous ways to do this, though the most common is called a leach field. It's a series of underground pipes with holes that allow the effluent to trickle out, so it's evenly distributed into the soil. Most leach fields have rocks or gravel around these pipes so that dirt doesn't pack the holes shut or slow the flow. How Does a Septic System Work: The Role of Bacteria The goal of the unit is always to clean the water well enough that it can easily return to the environment. Bacteria naturally enters into the reservoir with the waste and that bacteria goes to work digesting the solids. As much as 50% of the solids can be converted into liquid and gases in the reservoir. Bacteria also forms a layer of biomat on the soil of the leach field as well as in the lines. The biomat slows the stream of effluent even more, but it gives the bacteria more time to remove any remaining particles and pathogens. Lastly, the top layers of soil also have bacteria. So, as the effluent enters the soil, Mother Nature finishes the job. By the time the effluent reaches the water table, it's clean. How Septic Tanks Work: Care and Maintenance The last part that needs to be managed on our "How does a septic tank work?" page is how to care for your unit. Most units last decades. Cement reservoirs often survive for 40 years or more, with some still in use after over 100 years. However, the bacteria doesn't ever totally clean out the reservoir, even if you try to provide more bacteria to it, so the remaining solids have to be cleaned out every 3-5 years. If you have a traditional unit, this may effectively be the only care it ever needs, though it should be examined for wear and damage every time it gets pumped.
If you need a unit installed, maintained, or repaired, Atlanta Septic Tank Pros' experienced partner technicians can help. They deal with every aspect of your unit, with precision, expertise, and top-rated customer service. Call us at (404)998-8812 today. http://atlantaseptictankpros.com/how-does-a-septic-tank-work/
Installing septic tank risers can make it much easier for you or your technician to gain access to your below ground reservoir, but they don't come standard with most system installations. This is because access is needed so seldom that many business owners and homeowners simply choose to have the whole thing covered from sight for aesthetics. At Atlanta Septic Tank Pros, our partner technicians are glad to include them from the origin and can retrofit them at any point down the line, provided your unit is in good condition. What Do Septic Tank Risers And Septic Systems Install Do? Normally, reservoirs are buried underground and the access ports must be located and excavation executed before pumping or an inspection can be done. Septic tank risers are like pipes, generally made from PVC, that connect to the manholes on the reservoir and extend to ground level. Locking covers are attached to the top for safety. What are the Pros and Cons of Septic Tank Repair Them? Deciding whether to include them on is a personal choice, and you'll find some of the pros and cons below.
Pros [list][*]Access to the reservoir is instant[*]No more digging or the added expense of digging[*]You'll always know where your unit is located[/list]Cons [list][*]The covers can be unsightly[*]The install costs money[/list]What's Involved In Installing Septic Tank Risers And Septic Repair? Interestingly, most municipalities consider this installation a change to the unit and, as such, they require a special permit to include them on. Our partner technicians are familiar with all the local codes and will obtain any necessary permits in advance, so you stay compliant with the law. During the installation, the top of the reservoir is cleared of soil and the existing covers are taken out. Cement covers can be left on top of the reservoir and be closed up with it or can be taken out entirely. During this time, children and pets should be kept out of the area, to guarantee nobody falls in. Our partner technicians work rapidly to reduce the danger and are careful to keep the area clear for safety measure. Once the area is clear, the septic tank risers and lids are connected in place and the top of the reservoir is wrapped in dirt again. Call Atlanta Septic Tank Pros to Have Your Septic Tank Risers Installed by Our Partner Technicians Over the long time of your unit, risers are a sound investment. They save you money because excavation is no longer required when your unit needs pumping, an inspection, or maintenance, and you can be sure you'll never have to pay someone to locate the reservoir again, either. Our partner technicians have the training to be sure that your install will be carried out safely and properly, as well as the experience to do it in a punctual manner and to code. If you 'd like a comprehensive estimate on installing septic tank risers, call us at (404) 998-8812 today.
When people refer to an above ground septic tank, they can be referring to one of two totally different things. At Atlanta Septic Tank Pros, our partner technicians handle it all, providing experience, expertise, and an elite level of service to the table.
In a true sense, the phrase refers to alternative units that have a reservoir that sits out in the open, on top of the earth. Conventional units have buried reservoirs that generally can't be detected by the naked eye. However, burying the reservoir is often illegal on waterfront property and the expense of excavation can be cost-prohibitive if the property isn't used year-round, so cabins and vacation homes sometimes have them.
At times, people also choose the phrase to describe what's known as a mound system. It's not accurate because the mound refers to where the water, or effluent, is expelled, and it's not a reflection of the reservoir at all. These kinds of units are frequently in use when there's a problem with the soil that would otherwise let the effluent to reach the water table before being tidied up by the soil. This page contains information on true above ground septic tanks. For more information on mound units, please see our Mound Septic System page.
Installation of the reservoir is reasonably straightforward, as excavation isn't needed. However, permits are still required and the reservoir must be hooked up to the home's plumbing as well as to a discharge area for the effluent. In certain areas, the reservoir may not be able to have a proper leach field or discharge area. If this is the case, the entire reservoir will need to be pumped by a licensed professional usually. Our skilled partner technicians manage all this, including the setting up and the permits, so you can be sure everything is done to code and your unit is safe for your family, as well as the environment.
Traditional residential units need pumping every 3-5 years, but if your unit is part of a seasonal or part-time home, it's a good idea to have it pumped and surveyed as you wrap up the season each year. Because pumping needs are normally determined by the use the unit gets as well as the size of the reservoir, there is a great deal of variety with these. Please speak with one of our experienced partner technicians to determine what the proper pumping schedule for your reservoir is. As part of the regular pumping appointment, your unit will be inspected, to check for damage and wear. If you do not use yours very often, it's a good idea to have a technician out to check it before you begin using it every year.
Above Ground Septic Tank Repairs and Emergencies
If something goes wrong with your unit, call us right away. We'll make sure a professional technician is dispatched as promptly as possible, so service can be restored instantly.
A mound septic system is an alternative to conventional units and is regularly only used when the traditional counterparts are not an option. At Atlanta Septic Tank Pros, our partner technicians are routinely called upon to help homeowners and business owners deal with their tricky septic needs, including planning, designing, and installing on-site wastewater treatment facilities when Mother Nature doesn't want to cooperate.
For the most part, this type of unit is very similar to a traditional one, but conventional units discharge the effluent (water from the tank) into an underground leach field. With this method, the bacteria in the soil finishes purifying the effluent before it reaches the water table. When a mound septic system is in use, the effluent is pumped to a man-made hill, which is typically built of gravel and sand, with a layer of soil on top.
There are three main reasons why this alternative unit may be put forward:
[list=1] [*]When water isn't sucked in by the soil well. During the initial planning stages, the soil on the property will undertake a percolation or perc test. During the test, the technician determines the rate at which the soil absorbs water. If it drains too fast or too gradual, the effluent will not have time to be filtered before it arrives at the water table or it may sit on the surface too long, posing a health risk. [*]When the ground has porous bedrock with inadequate soil on top. Some sites have bedrock buried beneath the soil, which can allow the effluent a direct path to the water table. Therefore, it can quickly contaminate drinking water. [*]When the water table is high. Again, if the water table is high, the soil won't have time to filter the effluent before it reaches the water. [/list] Mound Septic System Installation
Knowing when a different style of unit is appropriate is key to keeping you and your family safe and healthy. Our partner technicians handle numerous tests to ascertain the right unit is selected for your needs and property requirements. They also handle all the planning, permits, and the actual installation, so you can rest easy knowing that your unit will be built to code, in a safe and expeditious manner.
Like any other kind of unit, these need routine pumping, too. Most tanks need it every 3-5 years, but you may need to be on a more frequent schedule if you use a garbage disposal or have other appliances that add to the load. Our partner technicians work quickly during these routine visits, so you can get on with your day fast, but they also take the time to inspect the unit and ensure it's operating properly and has no signs of damage or wear.
Mound Septic System Repairs
A non-functional unit can be unsanitary and can cause property damage. If you notice anything odd about your unit, such as standing water, a backup, or a strong odor, be sure to call us right away.
Contact Atlanta Septic Tank Pros for All Your Mound Septic System Needs
From install to maintenance, inspections, and repairs, our experienced partner technicians can handle it all. Best of all, they provide the highest level of customer service, working diligently and ensuring you have the tools you need to make educated decisions about the care of your unit. For more information about the services they provide or to book an appointment, call (404) 998-8812 today.